Download Fortune DDLPal Downloads Crack Download Download Serial Warez Download Warez Download Download Serial Download Warez WarezKeeper DownloadWarez Premium



Apr 09

Intel SSD Data Center Tool 3.0.0


Intel SSD Data Center Tool 3.0.0 | 20.5 Mb

The Intel® SSD Data Center Tool help screen provides additional information for each command. Both the Windows* and Linux* versions of this tool are command line based.Use of the Intel® SSD DCT under Windows operating systems requires administrator access. Access can be obtained by right-clicking on the Command Prompt icon and selecting “Run as Administrator”.

On Linux* systems, run the tool with root privileges. This can be done through either sudo or su commands. Linux* users must verify the tool has executable rights.
The Intel® SSD Data Center Tool supports the following Intel® Solid State Drives:

Intel® SSD DC P3700 Series

Intel® SSD DC P3600 Series

Intel® SSD DC P3608 Series

Intel® SSD DC P3500 Series

Intel® SSD 750 Series

Intel® SSD DC S3500 Series

Intel® SSD DC S3510 Series

Intel® SSD DC S3610 Series

Intel® SSD DC S3700 Series

Intel® SSD DC S3710 Series

Access the PCIe* drivers.

The Intel® SSD Data Center Tool does not support any other Intel® SSDs and does not support the Intel® SSD 910 Series products. Access the Intel SSD® 910 Series Data Center Tool.
*Other names and brands may be claimed as the property of others.

Whats New:
Version: 3.0.0 (Latest) Date: 3/7/2016
A new version of the Intel® SSD Data Center Tool (Intel® SSD DCT) 3.0.0 is now available. This release of the tool includes support on ESXi 5.5 and 6.0 as well as enhancements to the syntax, including new/modified Targets and Properties.

This version also includes a firmware update for the Intel® SSD DC S3700, S3500, S3710, S3610 and S3510 Series products.

For the Intel® SSD DC S3700 Series, the latest firmware revision is 5DV12270.
For the Intel® SSD DC S3500 M.2 and DC S3500 HD Series, the latest firmware revision is G2010150.
For the Intel® SSD DC S3500 Series, the latest firmware revision is D2012370.
For the Intel® SSD DC S3710, DC S3610 and DC S3510 Series, the latest firmware revision is G2010150.

The Intel® SSD DCT is a drive management tool for Intel® SSD Data Center Family of products, providing the following key features for both SATA and PCIe* drives:

Detecting Intel® SSD Data Center PCIe* NVMe and SATA devices attached to a host system
Parsing a drive’s Identify Device information
Parsing a drive’s SMART (Self-Monitoring and Reporting Technology) information
Resizing the SSD’s usable storage capacity by changing its maximum LBA setting
Updating SSD firmware:
The tool carries a firmware payload for all supported drives
When drive information is displayed, the tool will indicate if a new firmware release is available
The tool does not update firmware on Engineering Sample (ES) drives
Calculating drive life expectancy (Endurance Analyzer feature)
Enable/Disable Latency Tracking
Parsing read and write commands Latency Tracking logs
Read and/or modify the SM Bus Address for PCIe* NVMe family drives
Setting the Power Governor Mode (vendor unique feature). Three Modes are supported:
0: 25-watts for PCIe* NVMe devices; 40W for PCIe* NVMe x8 devices; Unconstrained for SATA devices.
1: 20-watts for PCIe* NVMe devices; 35W for PCIe* NVMe x8 devices; Typical (7-watts) for SATA devices
2: 10-watts for PCIe* NVMe devices; 25W for PCIe* NVMe x8 devices; Low (5-watts) for SATA devices.

The DCT features a Command Line Interface (CLI) for both Windows* and Linux*.

The DCT User Guide is included in both of the downloadable ZIP files along with a copy of the software license.


Download Via RapidGator

Download Via UploadedNet

Leave a Reply

Full Version FullDownload FullReleases DirtyWarez FullVersions